View B39212B8635P810_9031410.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer wcdma / lte band 1 / cdma 1x series/type: ordering code: b8635 B39212B8635P810 date: version: november 19, 2014 2.3 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 november 19, 2014 b8635 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n low-loss saw duplexer for mobile telephonewcdma / lte band 1 and cdma 1x systems n low insertion attenuation n low amplitude ripple n usable passband 60 mhz n single-ended to balanced transformation inantenna-rx path n impedance transformation 50 w to 100 w in antenna-rx path n high isolation between tx and rx features n package size 1.8 x 1.4 mm 2 n max. package height 0.475mm n rohs compatible n approximate weight 0.0038g n package for s urface m ount t echnology ( smt ) n ni terminals, au-plated n balanced rx port, unbalanced tx port n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitive l evel 3 bottom view top view side view 0.3 4 0.35 0.25 0.25 8 4 8 1.4 1.8 1 2 3 6 5 7 5 6 1 2 3 7 0.475 max. 0.7 pin configuration n 3 tx input, unbalanced n 6 antenna n 1, 8 rx output, balanced n 2, 4, 5, 7 to be grounded 4,5 1 3 8 2,7 6
3 november 19, 2014 b8635 1950.0 / 2140.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = C30 ?c to +90 ?c tx terminating impedance: z tx = 50 w ant terminating impedance: z ant = 50 w || 2.7 nh rx teminating impedance: z rx = 100 w (balanced) || 10.0 nh characteristics tx-antenna min. typ. @ 25 ?c max. center frequency f c 1950.0 mhz maximum insertion attenuation a max 1920.0 ... 1980.0 mhz 1.5 2.0 db 1922.4 ... 1977.6 mhz a wcdma 1) 1) attenuation of wcdma signal (power transfer function). please refer to page 8 of this document. 1.4 1.9 db amplitude ripple (p-p) da 1920.0 ... 1980.0 mhz 0.6 1.1 db 1922.4 ... 1977.6 mhz a wcdma 1) 0.5 1.0 db error vector magnitude evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141 1922.4 ... 1977.6 mhz 0.7 2.0 % tx port vswr 1920.0 ... 1980.0 mhz 1.6 2.0 ant port vswr 1920.0 ... 1980.0 mhz 1.4 2.0
4 november 19, 2014 b8635 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristicstemperature range for specification: t = C30 ?c to +90 ?c tx terminating impedance: z tx = 50 w ant terminating impedance: z ant = 50 w || 2.7 nh rx teminating impedance: z rx = 100 w (balanced) || 10.0 nh characteristics tx-antenna min. typ. @ 25 ?c max. attenuation a 10.0 ... 420.0 mhz 30 56 db 420.0 ... 494.0 mhz 44 54 db 843.0 ... 894.0 mhz 38 44 db 1565.42 ... 1573.374 mhz 39 42 db 1573.374 ... 1577.466 mhz 39 42 db 1577.466 ... 1585.42 mhz 39 43 db 1597.5515 ... 1605.886 mhz 39 43 db 1605.886 ... 1805.0 mhz 25 34 db 1805.0 ... 1865.0 mhz 25 31 db 1865.0 ... 1880.0 mhz 10 33 db 2010.0 ... 2025.0 mhz 19 1) 1) temperature range for this specification is +15 to +85 ? c 24 db 2110.0 ... 2170.0 mhz 42 45 db 2112.4 ... 2167.6 mhz a wcdma 2) 2) attenuation of wcdma signal (power transfer function). please refer to page 8 of this document. 42 45 db 2400.0 ... 2500.0 mhz 30 35 db 2620.0 ... 2690.0 mhz 20 32 db 3840.0 ... 3960.0 mhz 19 23 db 5150.0 ... 5940.0 mhz 12 17 db
5 november 19, 2014 b8635 1950.0 / 2140.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = C30 ?c to +90 ?c tx terminating impedance: z tx = 50 w ant terminating impedance: z ant = 50 w || 2.7 nh rx teminating impedance: z rx = 100 w (balanced) || 10.0 nh characteristics antenna-rx min. typ. @ 25 ?c max. center frequency f c 2140.0 mhz maximum insertion attenuation a max 2110.0 ... 2170.0 mhz 1.9 2.2 db 2112.4 ... 2167.6 mhz a wcdma 1) 1) attenuation of wcdma signal (power transfer function). please refer to page 8 of this document. 1.9 2.1 db amplitude ripple (p-p) da 2110.0 ... 2170.0 mhz 0.3 0.7 db 2112.4 ... 2167.6 mhz a wcdma 1) 0.3 0.7 db error vector magnitude evm 2) 2) error vector magnitude (evm) based on definition given in 3gpp ts 25.141 2112.4 ... 2167.6 mhz 1.0 2.0 % ant port vswr 2110.0 ... 2170.0 mhz 1.6 2.0 rx port vswr 2110.0 ... 2170.0 mhz 1.7 2.0 common mode rejection ratio cmrr 2110.0 ... 2170.0 mhz 19 3) 3) a combination of 10 ? phase balance and 1 db amplitude balance corresponds to 19.6 db cmrr. 22 db imd product level limits 4) at f tx =1950.0 mhz, f rx =2140.0 mhz 4) imd product level limits for power levels p tx =21.5 dbm (antenna port output power) and p blocker =-15dbm (antenna port input power). blocker 1 190.0 mhz -130 -110 dbm blocker 2 1760.0 mhz -112 -104 dbm blocker 3 4090.0 mhz -117 -106 dbm
6 november 19, 2014 b8635 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristicstemperature range for specification: t = C30 ?c to +90 ?c tx terminating impedance: z tx = 50 w ant terminating impedance: z ant = 50 w || 2.7 nh rx teminating impedance: z rx = 100 w (balanced) || 10.0 nh characteristics antenna-rx min. typ. @ 25 ?c max. attenuation a 10.0 ... 1920.0 mhz 35 58 db 1920.0 ... 1980.0 mhz 45 57 db 1922.4 ... 1977.6 mhz a wcdma 1) 1) attenuation of wcdma signal (power transfer function). please refer to page 8 of this document. 45 57 db 1980.0 ... 2025.0 mhz 15 37 db 2255.0 ... 2400.0 mhz 15 44 db 2400.0 ... 2484.0 mhz 30 44 db 2484.0 ... 6000.0 mhz 35 45 db
7 november 19, 2014 b8635 1950.0 / 2140.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristicstemperature range for specification: t = C30 ?c to +90 ?c tx terminating impedance: z tx = 50 w ant terminating impedance: z ant = 50 w || 2.7 nh rx teminating impedance: z rx = 100 w (balanced) || 10.0 nh characteristics tx-rx min. typ. @ 25 ?c max. differential mode isolation a 1922.4 ... 1977.6 mhz a wcdma 1) 1) attenuation of wcdma signal (power transfer function). please refer to page 8 of this document. 55 59 db 1920.0 ... 1980.0 mhz 55 2) 2) valid for room temperature at 25 ? c . 59 db 1920.0 ... 1975.0 mhz 55 59 db 1975.0 ... 1980.0 mhz 53 59 db 2112.4 ... 2167.6 mhz a wcdma 1) 53 59 db 2110.0 ... 2170.0 mhz 53 59 db 3830.0 ... 3970.0 mhz 20 54 db 5750.0 ... 5950.0 mhz 20 49 db common mode isolation a 1922.4 ... 1977.6 mhz a wcdma 1) 47 50 db 1920.0 ... 1980.0 mhz 47 50 db
8 november 19, 2014 b8635 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet annotation for characteristics sectionattenuation of w-cdma signal (power transfer function, a w-cdma ) is determined by with f carrier according to 3gpp ts 25.101 (e.g. for umts pass band, f carrier ranges from 1922.4 mhz (lowest tx channel) to 1977.6 mhz (highest tx channel)). here, h rrc (f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following normalization: s sd 21 f ( ) h rrc f f carrier C ( ) 2 fd C h rrc f ( ) 2 f 1 = d C
9 november 19, 2014 b8635 1950.0 / 2140.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. maximum ratings storage temperature range t stg C40/+85 ?c dc voltage v dc 5 1) 1) 168h damp heat steady state acc. to iec 60068-2-67 cy v esd voltage v esd 50 2) 2) acc. to jesd22-a115b (mm - machine model), 10 negative and 10 positive pulses. v machine model 250 3) 3) acc. to jesd22-a114f (hbm - human body model), 1 negative and 1 positive pulses. v human body model 600 4) 4) acc. to jesd22-c111c (cdm - charged device model), 3 negative and 3 positive pulses. v charged device model input power at 1920.0 ... 1980.0 mhz p in 29 dbm continuous wave elsewhere p in 10 dbm t = 50 ?c, 5000 h }
10 november 19, 2014 b8635 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-antfrequency response rx-ant
11 november 19, 2014 b8635 1950.0 / 2140.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-antfrequency response tx-ant (wideband)
12 november 19, 2014 b8635 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response rx-antfrequency response rx-ant (wideband)
13 november 19, 2014 b8635 1950.0 / 2140.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-rx (differential mode)frequency response tx-rx (common mode)
14 november 19, 2014 b8635 1950.0 / 2140.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet vswr s 11 tx- port s 22 ant-port s 33 rx-port
15 november 19, 2014 b8635 1950.0 / 2140.0 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. references type b8635 ordering code B39212B8635P810 marking and package c61157-a8-a149 packaging f61074-v8259-z000 date codes l_1126 s-parameters b8635_nb_un.s4p, b8635_wb_un.s4psee file header for port/pin assignment table soldering profile s_6001 rohs compatible rohs-compatible means that products are compatible with the requirements according to art. 4 (substance restrictions) of di- rective 2011/65/eu of the european parliament and of the council of june 8 th , 2011, on the restriction of the use of certain hazardous substances in electrical and electronic equipment ("directive") with due regard to the application of exemptions as per annex iii of the directive in certain cases. moldability before using in overmolding environment, please contact your epcos sales office. matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos agsystems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2014. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
16 november 19, 2014 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, ceraplas, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, tfap, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39212B8635P810

	To Download B39212B8635P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .